PR III UL 300 CS
The PR III UL 300 CS unit represents a complete automation solution, which is used to further enhance the profitability of AMADA compact storage system.
Profitable production is made possible by the high level of automation.
Contributing to this are the three servo axes, which ensure the high positioning speeds of the individual sorting unit, as well as the idle position in close proximity to the machine: Both factors increase machine run time by minimizing idle time.
The handling for a variety of materials is performed by 32 individually controlled suction grippers. The vacuum technology and the minimal release height ensure reliable and careful handling of the material. The PR III UL 300 CS can therefore also be used for complex production parts and materials with sensitive surfaces.
The PR III UL 300 CS configuration is available to remove residual scrap and parts attached to micro-tabs.
- High profitability
- Maximized machine run times
- Precise stacking permits automated down-stream processing
- Reliable handling of various materials
|PR III UL 300|
|Part Size Max.||2500 x 1000 mm|
|Part Size Min.||150 x 150 mm|
|Sheet thickness||0,5 - 3,0 mm|
|Max. part weight||50 kg|
|Stocking area||3400 x 1400 mm (4 x Euro pallets)|
|Interrupt time||3 - 5 sec|
|Max. load and part table||4000 kg|
|Max. stocking height||450 mm|
|Max. speed pick up unit X-axis||180 m/min|
|Max. speed pick up unit Y-axis||90 m/min|